EM 202
Código: 37
- Imprimir
- Enviar
Descripción
Product Name : Ethernet Module Model No. : EM202 Introduction : The EM202 is a board-level Ethernet Module in the RJ45 form factor. Measuring only 32x19x16 ...
Características
Product Name : Ethernet Module
Model No. : EM202
Introduction : The EM202 is a board-level Ethernet Module in the RJ45 form factor. Measuring only 32x19x16 mm, the EM202 adds a 100BaseT Ethernet port to any serial device. The EM202 is highly integrated and requires no external components, as standard Ethernet magnetics and RJ45 connector are built into the Module. Module's serial port is of TLL type and interfaces directly to the serial port pins of UARTs, microprocessors, and microcontrollers.
Features : Hardware Feature:
l Board-level component, installs on the internal board (PCB) of your serial device
l Very compact, dimensions only 32x19x16mm
l Requires no external components
l One 100BaseT Ethernet port (standard magnetics and RJ45 connector built in)
l One serial (TTL) port with full-duplex and half-duplex modes, baudrates of up to 115200bps. Available lines: TX, RX, RTS, CTS, DTR, DSR
l Extended routing buffers- up to 4096 bytes in each direction
l Internal EEPROM to store functioning parameters (Settings)
l Internal firmware can be upgraded through the serial and Ethernet ports
l Supplied with Device Server Toolkit (R3) software for Windows
l EM202-EV evaluation board available
l CE and FCC-approved
l Fully compatible with our original EM100 Ethernet Module Firmware Features
l Supports UDP, TCP, APR, ICMP (ping), and DHCP protocols
l Transparently routes the data between Ethernet and serial ports
l Numerous user-definable parameters (Settings) to fine-tune Device operation
l Settings can be edited through the serial port or via the network
l Over-the-network configuration of IP-address
l Plus many other features introduced in the Release3 firmware...
*These features are actually delivered by the application firmware loaded into the EM202
Application : Data collection & security terminals:
* Access Control Terminals
* Security Devices
* Time Recorders
* Warehouse Terminals
* Shop floor automation Terminals
Remote Sensors & Meters:
* Power monitors
* Power meters
* Environmental monitors
* Temperature monitors
* Data loggers
Auto-ID Scanners:
* Barcode Scanners
* Magnetic Card Readers
* RFID Readers
* Electronic Signboards
* PC-less entry systems
* Low-cost educational systems
* Vending Machines
* POS Systems
* Laboratory instruments
* Serial printers
* PBX Stations and many, many others...
Model No. : EM202
Introduction : The EM202 is a board-level Ethernet Module in the RJ45 form factor. Measuring only 32x19x16 mm, the EM202 adds a 100BaseT Ethernet port to any serial device. The EM202 is highly integrated and requires no external components, as standard Ethernet magnetics and RJ45 connector are built into the Module. Module's serial port is of TLL type and interfaces directly to the serial port pins of UARTs, microprocessors, and microcontrollers.
Features : Hardware Feature:
l Board-level component, installs on the internal board (PCB) of your serial device
l Very compact, dimensions only 32x19x16mm
l Requires no external components
l One 100BaseT Ethernet port (standard magnetics and RJ45 connector built in)
l One serial (TTL) port with full-duplex and half-duplex modes, baudrates of up to 115200bps. Available lines: TX, RX, RTS, CTS, DTR, DSR
l Extended routing buffers- up to 4096 bytes in each direction
l Internal EEPROM to store functioning parameters (Settings)
l Internal firmware can be upgraded through the serial and Ethernet ports
l Supplied with Device Server Toolkit (R3) software for Windows
l EM202-EV evaluation board available
l CE and FCC-approved
l Fully compatible with our original EM100 Ethernet Module Firmware Features
l Supports UDP, TCP, APR, ICMP (ping), and DHCP protocols
l Transparently routes the data between Ethernet and serial ports
l Numerous user-definable parameters (Settings) to fine-tune Device operation
l Settings can be edited through the serial port or via the network
l Over-the-network configuration of IP-address
l Plus many other features introduced in the Release3 firmware...
*These features are actually delivered by the application firmware loaded into the EM202
Application : Data collection & security terminals:
* Access Control Terminals
* Security Devices
* Time Recorders
* Warehouse Terminals
* Shop floor automation Terminals
Remote Sensors & Meters:
* Power monitors
* Power meters
* Environmental monitors
* Temperature monitors
* Data loggers
Auto-ID Scanners:
* Barcode Scanners
* Magnetic Card Readers
* RFID Readers
* Electronic Signboards
* PC-less entry systems
* Low-cost educational systems
* Vending Machines
* POS Systems
* Laboratory instruments
* Serial printers
* PBX Stations and many, many others...